SCULPFUN S30 Ultra 33W Laser Cutter

Laser Information:
Diode Laser Output Power: 33W (this is light energy, not electrical energy)
Laser Focus: 0.08x0.10mm
Laser Wavelength 455±5nm
Focusing Method: fixed focus column + sliding device
Laser Protective Cover: Equipped with a detachable laser protective cover to protect the eyes. You can adjust it up and down, or remove the eye shield.

Machine Information:
Engraving Accuracy: 0.005mm
Engraving Area Size: the standard version is 600x600mm
Machine Electric Power: about 156W
Machine Size:
External Size: 800x840mm (include the Motherboard Shell and X-axis Gantry Beam); 750x800mm (Beam Frame)
Internal Size: 700x760mm (inner Frame Size) 600x600mm (Working Area)
Height: 80mm (Beam Frame)220mm (Include X-axis Gantry Beam)

Air Pump:
Type: main board controlled air pump
Voltage: 24V
Flow Rate: 30L/min
Air Hose Inner Diameter: 7.5mm

Motherboard: 32-bit air-assisted motherboard, supports Bluetooth wireless connection.

Engravable/Cutting Material:
Carving Materials: all kinds of wood (including walnut, cherry wood, and other high-density wood), MDF, stone, cardboard, plastic, leather, PCB board, aluminum oxide, 304 stainless steel, ceramics, dark stone
Cutting Materials: all kinds of wood (including walnut, cherry wood, and other high-density wood), MDF, acrylic board, cardboard, non-woven fabric, bamboo chips, leather, some plastic boards, PCB boards

Operating Software: LightBurn (with air assist function M8), LaserGRBL, LightBurn, Benbox, GrblController, LiteFire, support Windows system, support MAC system. Supported file formats NC, BMP, JPG, PNG, DXF, and other picture formats.
Data Transmission Method: USB connection or Bluetooth wireless connection

Power Input: 220V AC, 50Hz
Power Output: 24V 7A